Bit Trade One Corne Cherry

What is Bit Trade One Corne Cherry?

Corne Cherry is a left / right separated keyboard with 6 horizontal x 3 vertical keys in a column staggered array (arranged in the column direction) + 3 thumb keys.
The total number of keys is 42 on the left and right, making it a very compact design. It is smaller than Let's Split, which is a typical 40% separate keyboard, and is arranged as if the number string was removed from Iris.
The Bit Trade One version has all the parts mounted so it can be assembled without soldering.
However, you need to write the firmware yourself.

Contents

-Mounted PCB ... 2 sheets-Top plate ... 2 sheets-Bottom plate ... 2 sheets-ProMicro protective plate ... 2 sheets-ProMicro ... 2 pieces-OLED module ... 2 pieces-Spacer M2 8mm ... 10 pieces-Spacer M2 9.5mm ... 4 pcs. Screw M2 4mm ... 28 pcs. Cushion rubber ... 8 pcs. 4-pole audio cable (for left and right connection) ... 1 pcs.-USB cable ... 1 pcs.

In addition to this, a key switch and a keycap are required for assembly.

Click here for the build guide.
https://github.com/bit-trade-one/crkbd/blob/master/corne-cherry/doc/buildguide_ver.BTO_jp.md

The photo is a sample created and is not the same as the product content.
Specifications are subject to change without notice.

Product Specifications

Supported interfaces :: USB MicroB
Maximum number of keys: 42
Corresponding key switch: Cherry MX
Body board dimensions: Approx. 140 x 90 mm (one side only) Weight: Approx. 100 g (one side only)
* Dimensions and weight are measurement results using the kit only.
The weight after completion varies depending on the combination with the key top and key switch.
Operating environment: Temperature: 0-45 ° C, humidity 10-60% (no condensation)
Contents:
Parts set Parts list & Web manual guide 1 copy Kit repair guide 1 copy Country of origin: Made in Japan
Warranty period: Only initial defects of parts are supported. Operation after assembly is not covered by the warranty.